Marantz PMD661MK II - Security and Access Control; Passcode Input Procedure

26
Passcode Input
The passcode between 0000 and 9999 that is set at “Passcode”
must be input to make the “Menu Lock” and “Passcode” settings on
the preset menu and to play files recorded with encrypted recording.
When starting to make these settings or to play such files, the
passcode input screen appears on the display and the character
selected with the cursor flashes. By factory default, “0000” is
displayed.
1.
Press the PITCH + or PITCH – button to change the character.
• Thenumberincreasesbetween0and9eachtimethePITCH +
button is pressed, and decreases between 0 and 9 each time
the PITCH – button is pressed.
• Pressthe8 or 9 button to move the cursor.
2.
Either press the 1/3/ENTER button or press the 9 button with
the cursor set at the last character to enter the passcode.
• InputtingcanbecancelledbypressingtheSTOP button.
Note:
If you have forgotten the passcode, you can change it to “0000” by restoring
the PMD661MKII to the factory defaults. (v P.67)