Marantz PMD661MK II - System Reset Procedures; Restoring Factory Default Settings

67
Perform the procedure below to restore the menu settings,
passcode, etc., to their factory defaults.
1.
Press the DISPLAY button and REC PAUSE button at the same
time, and turn the POWER slide switch ON. At this time, the
service menu list is displayed in the display section.
2.
Press the PITCH + or PITCH – buttons to select “Factory Default?”.
At this time, the selected menu item is highlighted.
3.
If the 1/3/ENTER button is pressed “Default?” is displayed in the
display section.
4.
While “Default?” is being displayed, press the 8 button and
select “YES”.
5.
If the 1/3/ENTER button is pressed “Executing ...” flashes in the
display section.
• Whenthesettingshavereturnedtothefactorydefaultsettings,
“Completed” is displayed for 1 second, after which the display
section returns to the service menu.
• When the settings have been returned to the factory default
settings, the “Date Form” default setting is the setting for the
US. This needs to be set correctly for the destination.
“Date Form”
US :M/D/Y
Europe:D/M/Y
6.
Turn the POWER slide switch OFF.
Factory Default