28
Pre Record
When PreRecord is on and the PMD661MKII is in record pause,
it listens to the selected audio input(s) and continuously buffers 2
seconds of audio. Then, when record is started, the PMD661MK
II
writes the previously buffered 2 seconds of audio to the card and
continues to record from there.
Setup the “PreRecord” of the preset menu. (v P.47)
Audio Filter
Low Cut Filter
The bass region of the input audio is cut as the audio is recorded.
Set to On to reduce noise, such as the sound of the wind when
recording outdoors.
Setup the “Low Cut” of the preset menu. (v P.48)
High Cut Filter
The treble region of the input audio is cut as the audio is recorded.
Set to On to reduce high frequency noise from the ambient
environment.
Setup the “High Cut” of the preset menu. (v P.48)
Silent Skip
The Silent Skip automatically pauses recording when there is a
period of silence and resumes recording when sound resumes.
“Silent Skip” menu setting permits:
• AdjustingthemarginsoundlevelthatdefinessilenceinOff,–60dB,
–54dB, –38dB, –20dB.
Setup the “Silent Skip” of the preset menu. (v P.48)
Manual Track
When the Manual Track (Manual Track incrementing) is on during
recording, press the FUNCTION button until “TR” appears on the
display, then press the
(F1: TR) button to increment the audio file.
A new audio file is created at that point. The continuity of sound is
not guaranteed and depends on the speed of a card or the audio file
size.
To Next Page
Loading...
