58
7) Card Check
The “Card Check” checks the writing performance of the SD card
being used and displays the results, as shown below.
Display Description
Good Recording is possible without problems.
Poor
Writing problems may occur during recording.
It is recommended you use a different SD card.
Notes:
• Do not turn the power off or open the SD card compartment’s lid while
the card is being checked. Doing so could damage the card or data.
Also, it is recommended you use the AC adapter when checking the card.
• The check results are for reference purposes only; they do not guarantee
operation.
8) Card Format
1.
From Stop, press the (F1: MENU) button.
2.
Press the PITCH + or PITCH – button to select “Utility”.
Then press the 1/3/ENTER button.
3.
Press the PITCH + or PITCH – button to select “Card Format”.
Then press the 1/3/ENTER button.
• “CardFormat?”messageisdisplayed.
• PresstheSTOP button to cancel a Card Format item and return
to STOP.
4.
While “Card Format?” message is displayed, select “Yes” and press
the 1/3/ENTER button to format the SD card.
During formatting, “Executing...” is displayed. After displaying
“Completed” for a second, PMD661MK
II return to the stop mode.
File format of the 661preset2.txt
Item Separator Set Value Break
[Preset-1] Fixed value 0D0Ah
Name = 0D0Ah
Input = 0D0Ah
...
...
...
...
Play Mode = 0D0A0D0A h
[Preset-2] Fixed value 0D0Ah
Name 0D0Ah
Input = 0D0Ah
...
...
...
...
Play Mode = 0D0A0D0A h
[Preset-3] Fixed value 0D0Ah
Name 0D0Ah
Input = 0D0Ah
...
...
...
...
Play Mode = 0D0A0D0A h
[Display] Fixed value 0D0Ah
Brightness 0D0Ah
...
...
...
...
File Sort 0D0A0D0A h
[Common] Fixed value 0D0Ah
Machine ID = 0D0Ah
Version = 0D0Ah
To Next Page
Loading...
