4. Check Battery Life- The Information Page
Access the Information page by tapping the INFO button in the
UPPER TOOL BAR.
You can check:
The battery life.
The percentage of the free memory
available for new programming.
Software version information
installed on to your RC9500.
To exit the Information page,
Tap the INFO button again or press
the Left Function button labeled “Exit”.
Most of the RC9500’s features can be set to your own needs.
1 Tap the INFO button in the
UPPER TOOL BAR.
The Information page appears.
2 Tap the “SETUP” button in the
Information page. The first Setup page
appears. You can display the second
and third Setup page by using the
Page + and Page - buttons.
3 Tap the button of the setting you want
to adjust. The color of the button will be changed.
4 Tap the button again or and buttons to adjust the set-
ting.
5 Press the Left Function button labeled “Exit” to store the set-
tings and exit from the Setup.
User Guide
12
Getting Started
5. The Setup Pages
To Next Page
Loading...
