Marantz RC9500 - Setting Time and Date

User Guide
14
When you have installed the battery pack and turned on RC9500,
you have to set the current time.
Note Every time you reset your RC9500 you will have to set the time
again.
Changing the Time Format
1 Tap the INFO button in the
UPPER TOOL BAR.
The Information page appears.
2 Tap the “SETUP” button in the
Information page. The first Setup page
appears.
3 Tap the Time Format button to toggle
between the three time formats:
■ 12 hour (AM/PM): This is the default format
■ 24 hour
■ No time
4 Tap the Left Function button labeled "Exit" to save your
changes and exit the Setup page.
Changing the Time
1 Tap the INFO button in the UPPER TOOL BAR.
The Information page appears.
2 Tap the “SETUP” button in the Information page.
The first Setup page appears.
3 Tap the Time button in the first Setup page.
The color of the Time button is changed.
4 Tap the and buttons to adjust the time.
5 Tap the Time button again. The new time is set.
Getting started
6. Setting Time and Date