ENGLISH
8
¤1
CANCEL
button
Use this button to cancel a programmed track. (See page
18)
¤2
A-B
(A-B Repeat button)
This button is to determine starting and ending points for
A-B repeat play. (See page 16)
¤3
RANDOM
button
This button is for random play. (See page 17)
¤4
AMS
(Automatic Music Scan button)
Use this button for AMS play. (See page 18)
¤5
REPEAT
button
This button is for repeat play. Each time this button is
pressed, repeat mode changes as follows. “All Repeat” →
“Track Repeat” → “Repeat Off” (See page 16)
¤6
MENU
button and
ENTER
button (Menu
setup)
These buttons are used to set the time for quick replay.
(See page 19)
¤7
QUICK REPLAY
(Quick replay) button
This button is used to do quick replay of the tracks. (See
page 19)
¤8
NOISE SHAPER
button
This button is pressed to turn the noise shaper on and off.
(See page 14)
¤9
DC FILTER
button
This button is pressed to turn the DC filter on and off. (See
page 14)
‹0
FILTER
button
This button is pressed to make the digital filter settings.
Each time it is pressed, the settings cycle from FIL1 →
FIL2 → FIL3 → FIL1. (See page 15)
‹1
DIGITAL OUT
button
This button is pressed to turn the digital output for the Au-
dio CD signal on and off. (See page 14)
‹2
INPUT
button
This button switches the input selector (INPUT) of the
Marantz PM-11S1 amplifier.
‹3
VOLUME
button
This button is used to increase or decrease the volume of
the Marantz PM-11S1 amplifier.
NAMES AND FUNCTIONS
To Next Page
Loading...
Need help?
General
