Marantz SA-14S1 User Manual (English)

Other manuals for Marantz SA-14S1

Questions and Answers:

P
Philip Russell PhDAug 19, 2025
Why is the Marantz CD Player remote not working?
- C
  cynthiafryeSep 12, 2025
  If operations cannot be performed through the remote control unit of your Marantz CD Player, try the following: * Replace the batteries with new ones. * Operate the remote control within 7 meters and at an angle within 30°. * Remove any obstacles between the unit and the remote. * Ensure batteries are inserted correctly, checking the q and w marks. * Move the unit away from strong light sources. * Adjust the direction and distance of 3D video devices to prevent interference. * Press the CD MODE button to switch to 'CD' mode. * Set the switch to 'INTERNAL' when using the unit independently.
U
ukingAug 21, 2025
What to do if Marantz SA-14S1 displays 'No Device'?
- T
  Tiffany StaffordAug 21, 2025
  If your Marantz CD Player displays 'No Device', 'Check FS' or 'Check Device', try disconnecting and reconnecting the USB memory device to ensure a proper connection. Connect the USB memory device directly to the USB port, without using a USB hub. Also, if you are using a portable hard disc drive that requires power from an AC adapter, use the AC adapter that came with the drive.
A
Amy SmithAug 23, 2025
What to do if Marantz CD Player cannot playback CD?
- S
  Steven EspinozaAug 23, 2025
  If your Marantz CD Player cannot playback when the play button is pressed, or cannot correctly play back a specific part of the disc, the CD might be dirty or scratched. Try cleaning the CD or inserting a different CD.
G
Gary CoffeyAug 26, 2025
Why does my Marantz CD Player say 'No Disc'?
- J
  John JimenezAug 26, 2025
  If your Marantz CD Player is displaying 'No Disc', it means the disc is loaded upside-down or no disc is loaded.
N
Nancy FrazierAug 28, 2025
Why won't my Marantz SA-14S1 CD Player play CD-R discs?
- T
  tinajacksonAug 28, 2025
  If your Marantz CD Player cannot playback CD-R/CD-RW discs: * Ensure the CDs have been finalized. * The issue might be due to poor recording conditions or the disc quality. * The DATA CD playback function only supports playback of MP3 and WMA files.
E
Evan HarrisonAug 30, 2025
How to disable auto standby on Marantz SA-14S1?
- M
  mallorybishopAug 30, 2025
  To prevent your Marantz CD Player from automatically turning off, disable the Auto Standby mode by setting 'Auto Standby' to 'Off' in the menu.
X
xgallegosSep 1, 2025
How to turn on display on Marantz SA-14S1?
- C
  Christopher HooverSep 1, 2025
  If the display on your Marantz CD Player is off, press the DISPLAY button and change the setting to 'On'.
W
walkerwilliamSep 3, 2025
Why is there no sound from my Marantz SA-14S1 CD Player?
- W
  William DanielsSep 3, 2025
  If your Marantz CD Player is not producing sound or the sound is distorted: * Check the connections for all devices. * Ensure connection cables are fully inserted. * Verify that input and output connectors are not reversely connected. * Check cables for damage. * Check the amplifier’s functions and controls and adjust as necessary.
J
Jeremy LeeSep 5, 2025
What does '0 0:00' mean on Marantz CD Player?
- M
  Melvin AdamsSep 5, 2025
  If your Marantz CD Player is displaying '0 0:00', it means a disc that cannot be played is loaded.
L
Laura SimpsonSep 7, 2025
Why is my iPod not connecting to my Marantz SA-14S1?
- K
  kayla82Sep 7, 2025
  If your iPod cannot be connected to the Marantz CD Player or ‘Check iPod’ is displayed: * Some iPod variations are not supported when connected to the USB port. * If using a USB cable other than the genuine cable, the iPod may not be recognized. Try using a genuine USB cable.

Marantz SA-14S1 Specifications

General

Frequency range	2 - 20000 Hz
Audio formats supported	AAC, MP3, WMA
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.0015 %
CD-R playback	Yes
Playback disc formats	CD audio
Device type	Portable CD player
Cassette deck	No
Product color	Black
Channels quantity	2 channels
Playback disc types	CD-R, CD-RW
Power source type	AC
AC adapter input voltage	230 V
Power consumption (standby)	0.3 W
Power consumption (typical)	37 W
Display type	LCD
USB 2.0 ports quantity	1