Why is the remote control not working for my Marantz CD Player?
If the remote control isn't working with your Marantz CD Player, ensure that the remote is pointed directly at the remote sensor without any obstructions. Check the batteries to make sure they aren't exhausted, and ensure that no strong light is interfering with the remote sensor.
How to fix a Marantz CD Player when the disc fails to rotate?
If your Marantz CD Player disc isn't rotating, make sure the mains lead is properly plugged in and the POWER switch is turned ON. Also, verify the disc is correctly placed on the tray with the label side up, and that it isn't dirty, scratched, or warped.
What to do if my Marantz SA-15S1 CD Player is rotating but no sound is heard?
If you're not hearing any sound from your Marantz CD Player, ensure that the amplifier and speakers are correctly connected and that the amplifier switch is ON. Check that the amplifier’s function or selector switch is set to “CD” or “AUX”, and verify that the amplifier’s volume control isn't set to the minimum level.
What to do if my Marantz CD Player disc stops in mid-operation?
If your Marantz CD Player stops playing a disc in the middle of operation, check the disc for dirt, scratches, or warping.
Why won't my Marantz SA-15S1 play a Super Audio CD?
If your Marantz CD player won't play a Super Audio CD, check if the disc is scratched, dirty, or warped. Also, ensure the amplifier’s input selector is not set to digital and verify that the disc is not a Super Audio CD multi-channel only disc.
Why can't my Marantz SA-15S1 play CD-R or CD-RW discs?
If your Marantz CD Player isn't playing a CD-R or CD-RW disc, make sure the disc isn't upside down. Also, verify that the disc contains a properly written Table of Contents (TOC) and that the recorded information is in an audio (CD-DA) format.
Detailed technical parameters for Super Audio CD and Audio CD playback.
Guidance on servicing procedures and required tools for the unit.
Crucial safety warnings, including laser safety and ESD precautions.
Procedures for emergency disc removal and accessing service mode.
Visual representation of the unit's electrical wiring and functional blocks.
Detailed electronic circuit schematics for troubleshooting and repair.
Visual guide to component placement on PCBs.
Illustrated breakdown of the unit with a parts list.
Pinouts and specifications for ICs and comprehensive component lists.
Illustrated breakdown and parts list for the disc loading mechanism.
Pin configurations and functional descriptions for ICs on the PCB.
Functional block diagram illustrating the audio PCB module's architecture.
Detailed circuit schematics for the Super Audio CD PCB module.
Component placement diagrams for the Super Audio CD PCB module.
List of electrical components used on the Super Audio CD PCB module.
General| Type | SACD/CD Player |
|---|---|
| Disc formats | SACD, CD, CD-R/RW |
| Frequency Response (SACD) | 2 Hz - 50 kHz |
| Frequency Response (CD) | 2Hz - 20kHz |
| Signal-to-Noise Ratio | 110 dB |
| Dynamic Range (SACD) | 110 dB |
| Dynamic Range (CD) | 100 dB |
| THD (SACD) | 0.0015% |
| THD (CD) | 0.002% |
| Total Harmonic Distortion | 0.002% |
| Channel Separation (SACD) | 110 dB |
| Channel Separation (CD) | 100 dB |
| Output Level | 2.0 Vrms |
| Digital Output | Coaxial, Optical |
| Headphone Output | Yes |
| Weight | 10.5 kg |
| Dimensions (W x H x D) | 440 x 129 x 384 mm |
| Dimensions | 440 x 129 x 384 mm |
| Output Level (Vrms) | 2.0 Vrms |
To Next Page
