Marantz SA-15S2 - User Manual

Other manuals for Marantz SA-15S2

Manuel D'Utilisation29 pages

Manual Del Usuario29 pages

Questions and Answers

C
Christopher MclaughlinJul 26, 2025
What to do if the Marantz SA-15S2 remote control is not working?
- W
  williamsashleyJul 26, 2025
  If you're experiencing issues with remote control operation on your Marantz CD Player, try these steps: First, ensure you're within the remote's operating range and that there are no obstructions between the remote and the unit. Replace the remote batteries with new ones. Also, check that strong light isn't hitting the unit's sensor window. Finally, make sure the switch on the back of the remote control is set to INTERNAL when using the unit independently.
S
Shane JonesAug 1, 2025
Why won't my Marantz CD Player play CD-R or CD-RW discs?
- J
  john29Aug 1, 2025
  If your Marantz CD Player isn't playing CD-R/CD-RW discs, make sure the disc is placed correctly in the tray with the label facing up. Also, confirm that the information recorded on the disc is in a compatible audio (CD-DA) format, or that any MP3/WMA files were properly recorded.
J
jthomasAug 7, 2025
How to fix a Marantz SA-15S2 CD Player when the disc fails to rotate?
- H
  huffmanmichelleAug 7, 2025
  If your Marantz CD Player disc isn't rotating, first ensure the power cord is securely plugged into the socket. Then, check that the unit is powered on. Make sure the disc is correctly placed on the tray with the label facing up. Finally, verify that the unit is in disc mode and not DAC mode.
J
jenniferwebbAug 13, 2025
Why does my Marantz SA-15S2 CD Player disc stop rotating in the middle of playing?
- K
  Kevin WilliamsAug 13, 2025
  If your Marantz CD Player disc stops rotating mid-operation, it might be due to a dirty or scratched disc. Try cleaning the disc's surface. If the disc has a lot of scratches or is badly warped, it may be unplayable.
J
Jillian ReedAug 18, 2025
What to do if my Marantz CD Player is playing but no sound is coming out?
- J
  Janice JohnsonAug 18, 2025
  If you're not hearing any sound from your Marantz CD Player, ensure that the amplifier and speakers are correctly connected. Verify that the amplifier is powered on and that its function or selector switch is set to the correct input (like “CD” or “AUX”). Also, check that the amplifier's volume control is not set to the minimum level and adjust it accordingly.

Summary

Important Safety Instructions

Additional Safety Information

Provides supplementary safety guidelines and warnings for product operation.

Product Features

Before Using the Player

Equipment Mains and Working Settings

Installation Location Precautions

Advises on suitable and unsuitable environments for player installation to ensure performance.

Handling Mains Cord Safely

Provides crucial safety instructions for handling the power cord to prevent hazards.

Prohibited Actions and Repairs

Warns against self-repair and specifies authorized service personnel.

Names and Functions

Front Panel Overview

Identifies and explains the controls and indicators on the player's front panel.

Remote Controller Buttons

Explains the function of each button on the remote control unit.

Rear Panel Connections

Describes the various input and output connectors on the rear of the unit.

Display Indicators Explained

Basic Connections

Connecting to Amplifier System

Guides on how to connect the player to an amplifier or AV receiver.

Connecting Power Supply

Instructions for plugging the unit into a power source.

Basic Operation

Normal Playback Procedure

Step-by-step guide for playing discs in the standard playback mode.

Track Selection Methods

Explains how to select specific tracks or search within tracks.

Advanced Connections

Digital Audio Component Connection

Instructions for connecting digital audio sources for recording or DAC use.

Digital Audio Input Terminal Use

Remote Control System Connection

Application Operation

Repeat Playback Modes

Shuffle and Programmed Playback

Searching Favorite Tracks (AMS)

Sound Mode Switching (Super Audio CD)

Setting Digital Output

Using as D;A Converter (DAC Mode)

How to configure and use the unit as a digital-to-analog converter.

Troubleshooting

Marantz SA-15S2 Specifications

General

Frequency range	2 - 20000 Hz
Audio formats supported	MP3, WMA
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.0015 %
Built-in audio D/A Converter (DAC)	Yes
Media types supported	CD, CD-R/RW, SA-CD
CD changer	-
Device type	HiFi CD player
Product color	Silver
Channels quantity	2 channels
Disc loading type	Tray
Channel separation	98 dB
Remote control type	RC003SA
Display type	LCD
Volume control	Rotary
Programmable tracks	24
Headphone outputs	1
Power consumption (typical)	20 W