Marantz SA-14S1 - Power does not turn on; Power is turned off; Operations cannot be performed through the remote control unit; No sound comes out

27
ENGLISH
n Power does not turn on / Power is turned o
Symptom Cause Page
Powerisnotturnedon. •Checkwhetherthepowerplugiscorrectlyinsertedintothepoweroutlet.
•Thisunitisinstandbymode.PresstheXCDbuttonontheremotecontrol.
12
13
Powerautomaticallyturnso. •TheAutoStandbymodeisset.TheAutoStandbymodeswitchestheunittostandbymodewhentheunitisnotoperatedfor
approximately30minutes.TodisableAutoStandbymode,set“AutoStandby”onthemenuto“O”.
25
n Operations cannot be performed through the remote control unit
Symptom Cause Page
Operationscannotbeperformedthroughthe
remotecontrolunit.
•Batteriesarewornout.Replacewithnewbatteries.
•Operatetheremotecontrolunitwithinadistanceofabout7mfromthisunitandatanangleofwithin30°.
•Removeanyobstaclebetweenthisunitandtheremotecontrolunit.
•Insertthebatteriesintheproperdirection,checkingtheqandwmarks.
•Theset’sremotecontrolsensorisexposedtostronglight(directsunlight,invertertypeuorescentbulblight,etc.).Movethe
settoaplaceinwhichtheremotecontrolsensorwillnotbeexposedtostronglight.
•Whenusinga3Dvideodevice,theremotecontrolunitofthisunitmaynotfunctionduetoeectsofinfraredcommunications
betweenunits(suchasTVandglassesfor3Dviewing).Inthiscase,adjustthedirectionofunitswiththe3Dcommunications
functionandtheirdistancetoensuretheydonotaectoperationsfromtheremotecontrolunitofthisunit.
•PresstheCDMODEbuttontoswitchtheremotecontroloperatingmodeto“CD”.
•Whenusingthisunitindependently,settheswitchto“INTERNAL”.
2
2
–
2
–
–
6
11
n Display on this unit shows nothing
Symptom Cause Page
Displayiso. •PressDISPLAY,andchangethesettingto“On”. 15
n No sound comes out
Symptom Cause Page
Nosoundisproducedorsoundisdistorted. •Checktheconnectionsforalldevices.
•Insertconnectioncablesallthewayin.
•Checkthatinputconnectorsandoutputconnectorsarenotreverselyconnected.
•Checkcablesfordamage.
•Checktheamplier’sfunctionsandcontrolsandadjustasnecessary.
8,9,
10,11
–
–
–
–
Troubleshooting