Marantz SR4023 User Manual (English)

Other manuals for Marantz SR4023

User Guide27 pages

Service Manual54 pages

Specification Sheet2 pages

Mode D'Emploi22 pages

Questions and Answers:

T
telliottJul 25, 2025
Why does control with the remote control unit fail on my Marantz SR4023?
- A
  Alex LeonardJul 26, 2025
  If you're having trouble controlling your Marantz Receiver with the remote, here are a few things to check: * Replace the batteries with new ones. * Ensure the remote controller’s function-key setting is correct for the equipment you are controlling. * Make sure you are close enough to the unit. * Remove any obstructions between the remote and the unit. * Verify that the main unit and remote controller are set to use the same remote control code.
A
Ashley RobertsJul 30, 2025
What to do if Marantz SR4023 Receiver has no sound and picture even when power is on?
- B
  Barry WheelerJul 30, 2025
  If your Marantz Receiver isn't producing sound or picture even when it's powered on, check the following: * Ensure that the mute function is off by using the remote control. * Verify that the input cables are correctly connected, referring to the connection diagram. * Make sure the master volume isn't turned all the way down; adjust it as needed. * Confirm that the function selector is set to the correct position.
G
George BarronAug 3, 2025
What to do if there is incorrect Audio or Video for selected source on Marantz SR4023 Receiver?
- C
  Christopher PriceAug 3, 2025
  If you're experiencing incorrect audio or video for the selected source on your Marantz Receiver, the input cable might be connected incorrectly. Refer to the connection diagram to ensure the cable is properly connected.
K
Kyle JordanAug 7, 2025
How to fix FM or AM reception failure on Marantz SR4023 Receiver?
- K
  Keith MoonAug 7, 2025
  If you're experiencing FM or AM reception failure with your Marantz Receiver, check the antenna connection. Ensure that the indoor FM and AM antennas are correctly connected to the FM and AM antenna outlets.
J
Julie CarlsonAug 12, 2025
Why is noise heard during AM reception on my Marantz SR4023?
- A
  Alejandra TerryAug 12, 2025
  If you're hearing noise during AM reception on your Marantz Receiver, it could be due to interference from other electrical fields. Try changing the location where the AM indoor antenna is set up.
J
Jose PierceAug 16, 2025
Why is noise heard during FM reception on my Marantz SR4023 Receiver?
- C
  Cynthia ChurchAug 16, 2025
  If you're hearing noise during FM reception with your Marantz Receiver, it could be due to weak radio waves from the broadcasting station. Consider installing an FM outdoor antenna to improve reception.
R
robert62Aug 20, 2025
What to do if I cannot get programmed station when the PRESET button is pressed on my Marantz Receiver?
- C
  Crystal WallaceAug 21, 2025
  If you cannot get programmed station when the PRESET button is pressed, it means that preset data has been erased. Disconnecting power plug for long periods of time will erase preset data. If that happens, input the preset data again.