ER WOOFER
SUB
RL
RL
DIG - 5 IN
/ MD
CDR
OUT
AUDIO
TOR
MONI
S
-
VIDEO
VIDEO
OUT
VCR2
DSS /
VCR2
DSS /
VCR1
VCR1
MONITOR
VCR2
DSS /
TV
IN
TV
VCR2
DSS /
IN
TV
DVD
VCR2
DSS /
IN
TAPE
TAPE
CD
RL
/ MD
CDR
OUT
IN / OUT
DIGITAL
DIG.OUT OPT
DIG - 1 IN
DIG - 2 IN
DIG.OUT COAX
VCR1
OUT
VCR2
DSS /
LR
AUDIO
OUT
VIDEO
OUT
S-VIDEO
OUT
LR
AUDIO
OUT
AUDIO
IN
LR
VIDEO
OUT IN
S-VIDEO
OUT IN
DIGITAL
OUT
L R
L R
L RL R
L R
L R L R
CONNECTING VIDEO COMPONENTS
VIDEO, S-VIDEO JACKS
There are two types of video jacks on the rear panel.
VIDEO jack
The video signal for the VIDEO jacks is the conventional composite
video signal.
S-VIDEO jack
The video signal is separated into luminance(Y) and color(C) signals
for the S-VIDEO jack. The S-VIDEO signals enables high-quality color
reproduction. If your video component has an S-VIDEO output, we
recommend to use it. Connect the S-VIDEO output jack on your video
component to the S-VIDEO input jack on this unit.
NOTES
• Be sure to connect the left and right audio channels properly.
Red connectors are for the R(right) channel, and white
connectors are the for L(left) channel.
• Be sure to connect input and output of video signal properly.
• Each type of video jack works independently. Signals input to
the VIDEO(composite) and S-VIDEO jacks are output to the
corresponding VIDEO(composite) and S-VIDEO jacks,
respectively.
• This unit has the “TV-AUTO ON/OFF” function to turn ON or
OFF automatically the power by the incoming video signal
from VIDEO jacks.
• You may need to setup the digital audio output format of your
DVD player, or other digital source component. Refer to the
instructions of the each component connected to the digital
input jacks.
• There is no Dolby Digital RF input jack. Please use an external
RF demodulator with Dolby Digital decoder to connect a video
disc player with the Dolby Digital RF output jack to the digital
input jack on this unit.
ANALOG AUDIO
DIGITAL AUDIO
(COAXIAL)
DIGITAL AUDIO
(OPTICAL)
VIDEO
S-VIDEO
DVD PLAYER
MONITOR
VCR
TV
SATELLITE TUNER