3108 DVR Installation Guide
iii
Mandatory Regulations
You should be familiar with the mandatory regulations governing the product’s operations. You should
also adhere to these instructions to ensure you meet regulatory compliance.
Electromagnetic Interference (EMI) Information
Canada - Industry Canada
This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations. Cet équipement a été testé et certifié conformément aux
limites imposées par la réglementation en vigueur pour un équipement numérique de classe A.
United States - Federal Communications Commission
This equipment has been tested and
found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the installation guide, is liable to cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case users will be required to correct the interference at their own expense.
Power Cord Notice
DVR Servicing Notice
Shipping Notice
WARNING!
A power cord is provided with a grounded attachment plug. To avoid electrical shock, always use the power
cord and plug with a properly grounded outlet. To maintain safety compliance, ensure the power cord has
the appropriate safety approvals for the country in which the equipment is to be installed.
WARNING!
The procedures contained in this publication outline how to install or service components located inside
the DVR, requiring the removal of the DVR cover. Installation and maintenance procedures requiring
internal unit access are to be performed by qualified service personnel only.
WARNING!
Shipment of the DVR and components may expose the unit to temperature extremes. We recommend you
allow the unit to return to room temperature prior to operation.
To Next Page
Loading...
