March SKALA - Repairs, Transportation, and Storage; Repair Limitations; Transportation and Storage Guidelines

16
button. A steady spark discharge should occur between the electrodes on the outside of
the product body (on the glass). The sound of the frequency discharge should be smooth
(monotone) without audible frequency gaps.
When you release the Start button, the discharge should stop.
After checking the operability, the product must be put on the safety lock.
4 Current repairs
4.1 The product cannot be repaired, except for the replacement the electroshock device
AIR-107 «SCORPION-A» (350) of the «Type 01»version.
WARNING! UNAUTHORISED DISASSEMBLY OF THE PRODUCT IS PROHIBITED!
5 Transportation and storage
5.1 Transportation and storage of the product version «Type 01» should be carried out
in cover with disconnected electroshock device AIR-107 «SCORPION-A» (350) which
must be transported and stored separately in accordance with the requirements set out in
SMKP30.00.00.00.000 TU.
5.2 Transportation and storage of the product version «Type 02» should be carried out in
cover with the battery disconnected.
5.3 Transportation and storage of the products is allowed under the conditions corresponding
to the group 2 of GOST 15150, at ambient temperatures from minus 20 to plus 40°C - in terms
of the impact of climatic factors.
5.4 The product may be transported by all means of transport under the conditions
corresponding to the group «C» according to GOST R 51908 - in terms of the impact of
mechanical factors.