9
1.3.6 On the «handle-shocker» (12) in the «Type 02» case (with its own built-in electroshock
device) there are (fig 6):
• safety lock (charge indicator) (15) that excludes accidental activation of the «handle-
shocker»;
• the «start» button;
• the battery case (17).
1.3.7
The content of precious materials and nonferrous
metals in the product does not exceed the norm.
1.4 Product design and operation
1.4.1
The damaging effect of the «Type 01» product
in contact mode is based on joint use with an external
electroshock device AIR-107 «SСORPION-A»
(350)
,
due to which high voltage pulses are generated and then
transmitted to the outer surface of the product using a
catcher.
The damaging effect of the «Type 02» product in contact
mode is based on the use of its own electroshock device
(«shocker handle» (fig.4), thanks to which high voltage
pulses are generated and then transmitted to the outer
surface of the product using a catcher.
1.4.2 Impact resistant housing also allows the use of the product as a shield to protect
against shocks and / or other mechanical influences.
fig.6
17
15
16
To Next Page
Loading...