34
Repeating a
specific passage
To repeat (continuously) a specific phrase or passage on a CD, press
repeat A>B at the beginning of the passage you'd like to repeat. At
the end of the passage, press repeat A>B again. The passage you
selected will repeat continuously.
While the repeat A>B function is active, A then B will appear
preceding the track number on the Display. To return to normal play,
press the repeat A>B button again, or press Play.
If your Nº31 is linked to a compatible Mark Levinson digital processor
via the communication ports, you may change the playback polarity.
(See "Linked functions.")
After loading a CD, press the polarity invert button on the digital
processor's front panel, or press d/a polarity on the Nº31's Remote
Control, then press Play. The CD will play with inverted polarity.
If you want this CD to always play with inverted polarity, press
program save before pressing Play. The Display will show
POLARITY PRG, a small
P will appear preceding the track number on
the Display, and inverted polarity will be saved as a "program" for that
CD. (See "Programming.")
To stop play before the end of the CD, press Stop. The Display will show
the total number of tracks and their total playing time.
You may also stop play by pressing LID Open/Close. In this case, play
will stop and the LID will open.
Inverting playback polarity
Stopping play
To Next Page
Loading...
