Need help?Do you have a question about the Mark Levinson N380S and is the answer not in the manual?
General| Total Harmonic Distortion (Preamplifier) | <0.003% (20Hz - 20kHz) |
|---|---|
| Signal-to-Noise Ratio (Preamplifier) | >100dB (A-weighted) |
| Inputs (Preamplifier) | 4 x RCA, 2 x XLR |
| Outputs | 1 x RCA, 1 x XLR |
| Outputs (Preamplifier) | 1 x RCA, 1 x XLR |
Describes LEDs for operational modes and buttons for mode selection, polarity, and mute.
Covers balanced and single-ended main outputs for connecting to a power amplifier.
Details balanced inputs for source equipment and standard inputs for various audio sources.
Guide to connecting audio sources and power amplifiers using appropriate cables.
Overview of system setup, input name options, and programming input names.
Instructions for assigning record outputs, programming input offsets, and setting automatic output levels.
Discusses proper placement of SSPs relative to the preamplifier and connection methods.
Explains how the Nº380S integrates with SSPs, including unity gain mode.
To Next Page
