Need help?Do you have a question about the Mark Levinson 27.5 and is the answer not in the manual?
General| Voltage Gain | 26 dB |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| Total Harmonic Distortion | <0.1% at rated power |
| Input Sensitivity | 1.5V |
| Signal to Noise Ratio | >80dB |
| Type | Solid-state |
| Power Output | 100 watts per channel into 8Ω (stereo) |
Procedures for safely removing the amplifier from its packaging.
Guidance on locating the amplifier for optimal performance and avoiding interference.
Requirements for adequate airflow to prevent overheating and ensure proper operation.
Instructions for connecting inputs for normal single-ended audio signal flow.
Instructions for connecting inputs for inverted single-ended audio signal flow.
Guidelines for connecting balanced audio inputs for non-inverting signal flow.
To Next Page