Need help?Do you have a question about the Mark Levinson 380 and is the answer not in the manual?
General| Type | Preamplifier |
|---|---|
| Number of Channels | 2 |
| Signal-to-Noise Ratio | > 100 dB |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | <0.005% |
| Gain | 12dB |
| Inputs | RCA |
| Outputs | RCA |
| Power Supply | Linear |
| Weight | 25 lbs (11.3 kg) |
Button to adjust the brightness of the N°380's display, with four levels including off.
Provides operational status, mode, source, and volume information for the N°380.
Button to cycle operational modes and associated mode indicator LEDs.
Controls listening volume and relative channel balance in balance mode.
Buttons to select inputs 1-6 for listening or recording.
Reduces main output level by a user-defined amount (1-60 dB) for temporary muting.
Toggles the N°380 between normal operation and standby mode.
Description and pin assignments for balanced XLR outputs for connecting to power amplifiers.
Description of RCA outputs for connecting to associated components, including SSPs.
Accepts balanced signals from source equipment via XLR connectors.
Buttons to remotely select the six inputs of the N°380.
Adjusts the listening volume at variable speeds for fine or large changes.
Toggles between normal output and a user-programmable mute level.
Details on RCA and XLR connectors, recommended cables, and AC power connection.
Primary mode for listening, controlling volume and selecting sources.
Details how the N°380's 'SSP' mode integrates surround sound processors seamlessly.
To Next Page