20
5 Polarity
Inverts the polarity (sometimes inaccurately called “absolute
phase”) of the outputs of the Nº380. A second press of this button
will restore the outputs to their original, non-inverting polarity.
6 Mode
Duplicates the function of the Mode button on the front panel,
cycling through
monitor, record select, and balance modes. As
with the front panel button, use it in conjunction with the Source
Selection buttons when in either
monitor or record select mode
and with the
volume +/- buttons when in balance mode.
7 Mute
Toggles between normal output level and the user-programmable
mute function, reducing the level by 1 to 60 decibels (depending
on the user’s programming). The factory default setting gives a 20
decibel reduction in output.
To Next Page