Mark Levinson 532 User Manual

N
o
532
Power Amplifier
Owner’s Manual

Mark Levinson 532 Specifications

General

Type	Solid-state stereo power amplifier
Power Output	300 watts per channel
Frequency Response	20 Hz - 20 kHz
Signal-to-Noise Ratio	> 110 dB
S/N Ratio	> 110 dB
Input	Balanced (XLR), Unbalanced (RCA)
Input Impedance	20kΩ (balanced), 10kΩ (unbalanced)
Voltage Gain	26.8 dB

Summary

Important Safety Instructions

Introduction

Product Description

Provides a detailed overview of the Nº532 Dual Monaural Power Amplifier's features and design.

Installation Considerations

Placement and Ventilation

Guidelines for positioning the amplifier for optimal performance and cooling.

Power Requirements

Front Panel

Rear Panel

Audio Channel Inputs

Network Setup

Connecting the Cables

Internal Web Page

Network Setup Parameters

Connecting With DHCP (Recommended)

Setting Up the Computer

Connecting With Static IP Addressing

Direct Connection

ML Net

Masters and Slaves

Explains the Master/Slave roles in the ML Net system.

ML Net and Link2

Link2

Details the Mark Levinson Link2 protocol for synchronized control.

Troubleshooting

No Power

Steps to resolve issues when the amplifier does not power on.

No Output

No Response to Commands in ML Net

Link2 Not Working

No Connectivity Via Ethernet

If All Else Fails...

Fault Protection

ML Net Fault Conditions

Restoring Factory Defaults

Care & Maintenance

Specifications