Need help?Do you have a question about the Mark Levinson 32 and is the answer not in the manual?
General| Brand | Mark Levinson |
|---|---|
| Model | 32 |
| Category | Amplifier |
| Language | English |
Explains symbols and terms used in the manual, including safety warnings and notes.
Details the advanced dual-chassis design and unique features of the N°32.
Lists key features and capabilities of the N°32, such as configurable inputs and dual-chassis design.
Provides guidance on optimal placement and setup for the N°32 to ensure performance.
Instructions for safely unpacking the N°32 and checking all included contents.
Details the process and importance of registering the product for warranty coverage.
Guidelines for optimal physical placement and ensuring adequate airflow for the N°32.
Information on how to replace the batteries in the remote control.
Explains the performance improvement over time and the initial warm-up process for the unit.
Guidelines for keeping the unit powered for optimal performance and maintaining warm-up.
Overview of the controls and indicators on the N°32's front panel.
Describes the various connectors and ports on the rear panel of the N°32.
Instructions for operating the N°32 using the remote control and its functions.
Guides users on how to navigate and use the setup menu for customization.
Explains how to configure input names, gain, offset, and record output settings.
Details how to set custom names for inputs using lists or character input.
Provides access to characters for custom input naming.
Describes how to optimize input gain levels to match source signal strength.
Explains how to adjust input volume level offsets for consistent sound.
How to deactivate record output connectors for selected inputs.
Instructions for programming the N°32 commands into a learning remote.
Configures the master volume attenuation level when the mute button is pressed.
Sets the maximum master volume level to prevent accidental high levels.
Configures trigger output signals for controlling other components.
Displays the current software version and information on upgrades.
Explains how to put the N°32 into and out of standby mode.
Configures an automatic standby timer for the N°32.
Adjusts the brightness of the front panel display and LEDs.
Controls the signal polarity of the main output.
Adjusts the left-to-right channel balance of the main output.
Allows switching between stereo and mono playback modes.
Enables sending selected inputs to record output connectors.
Configures an input to route through a dedicated equalizer.
Sets up the source input for the EQ mode configuration.
How to record and playback audio when EQ mode is active.
Integrates the N°32 with multi-channel surround sound processors.
Enables communication and shared controls between Mark Levinson components.
Details how to make physical Link connections between components.
Instructions on how to build custom Link cables.
Specifies requirements for components in a Link slave chain.
Step-by-step guide to building a Link slave chain.
Describes the shared controls available via Link connection.
General guide to diagnosing and resolving operational issues.
Steps to take if the unit does not power on.
Steps to resolve issues with the remote control not functioning.
Troubleshooting steps for when the remote control fails to learn commands.
Steps to diagnose and fix problems with no audio output.
Troubleshooting steps for when there is no signal to record outputs.
How to troubleshoot an input that does not appear or function.
Steps to troubleshoot when Link communication is not working.
Identifies and resolves sources of humming noise.
Steps to address unpredictable or inconsistent operation.
Final steps to take when other troubleshooting methods fail.
Procedure to reset all parameters to their original factory settings.
Guidelines for routine cleaning and upkeep of the N°32.
Lists the technical specifications of the N°32 preamplifier.
Official statement of compliance with relevant directives and standards.
Physical dimensions and diagrams for the N°32 Controller.
Physical dimensions and diagrams for the N°32 Preamplifier unit.
A template to record custom settings for future reference.
To Next Page
