Need help?Do you have a question about the Mark Levinson 26 and is the answer not in the manual?
General| Brand | Mark Levinson |
|---|---|
| Model | 26 |
| Category | Amplifier |
| Language | English |
Selects program source and tape monitor inputs.
Phase inversion switch for sonic optimization.
Selects between TAPE 1 and TAPE 2 inputs.
Selects one of six audio input sources.
Adjusts main output volume.
Adjusts left/right channel balance.
Selects between stereo and monaural modes.
Connects to balanced inputs of power amplifiers.
Connects to power amplifier or crossover inputs.
Input for tuner or line-level sources.
Outputs for tape machine inputs.
Inputs from tape machine outputs or line sources.
Connection for the PLS-226 power supply.
Input for CD player or line-level sources.
Input for line-level sources.
Input for phono or line-level sources.
Connects turntable tonearm ground lead.
Input for balanced line-level sources.
Inspect product and retain packing materials.
Position unit for optimal performance and accessibility.
Ensure adequate airflow for heat dissipation.
Describes RCA and XLR connectors for audio signals.
Adjusting line amplifier gain via internal switches.
Adjusting phono gain for different cartridges.
Selecting cartridge loading impedance via switches.
Using terminals for custom load resistor insertion.
Instructions for inserting load resistors into terminals.
Adjusting phono input capacitance with capacitors.
Adjusting gain for balanced inputs.
Step-by-step process for internal adjustments.
Correct connection of the AC power cord and polarity.
Unit designed to remain powered on; shutdown noted.
Top view physical dimensions of the Nº26 unit.
Side view physical dimensions of the Nº26 unit.
Top view physical dimensions of the PLS-226 unit.
Side view physical dimensions of the PLS-226 unit.
To Next Page