6
Voltage selection
The PLS-226 is factory-set (internally) for 100V, 120V, 200V, 220V, or
240V AC mains operation @ 50 or 60Hz. Make sure that the label on
the bottom of the PLS-226 indicates the correct AC operating voltage
for your location.
PLS-226 POWER SUPPLY
WARNING: BEFORE ATTEMPTING TO
OPERATE THIS DEVICE, REFER TO
OWNER'S MANUAL FOR PROPER
OPERATING INSTRUCTIONS AND SAFETY
PRECAUTIONS. HAZARDOUS VOLTAGE
AVAILABLE INSIDE; DISCONNECT AC~
MAINS CABLE BEFORE REMOVING COVER.
AC INPUT
OPERATING VOLTAGE:
90 – 110VAC~
105 – 125VAC~
180 – 220VAC~
210 – 240VAC~
230 – 250VAC~
~50 – 60HZ
SERIAL NO.
FUSES:
100 – 120VAC~
2A SLO–BLO 250VAC 3AB
200 – 240VAC~
1A SLO–BLO 250VAC 3AB
DESIGNED AND MANUFACTURED IN U.S.A. BY
MADRIGAL AUDIO LABORATORIES INC.
MAINS
Voltage
indication
DC OUTPUTS
PLS-226 bottom-panel
label
If the voltage indicated is incorrect, see your Mark Levinson dealer.
If you wish to change the AC operating voltage of the Nº26/PLS-226,
see your Mark Levinson dealer.
The Nº26/PLS-226 can be powered by a normal 15-ampere AC mains
line. If other devices are also powered from the same AC line, their
additional power consumption must be taken into account.
To Next Page
Loading...
Need help?
General
