Need help?Do you have a question about the Mark ERV Series and is the answer not in the manual?
Explains symbols indicating potential levels of caution for safe operation.
Details situations posing risks of death or serious injury, requiring strict adherence.
Outlines precautions for installation, operation, and maintenance to prevent injury or damage.
Provides detailed physical dimensions for the ERV500 model.
Provides detailed physical dimensions for the ERV1000 model.
Provides detailed physical dimensions for the ERV2000 model.
Lists specific measurements and duct sizes for different ERV models.
Covers general advice, ducting, environmental factors, and operational considerations for installation.
Details physical mounting methods, duct connections, and insulation requirements.
Outlines required cable specifications and electrical safety warnings for installation.
Illustrates the electrical connections for ERV500 and ERV1000 models.
Illustrates the electrical connections for the ERV2000 model.
Provides a step-by-step guide for initial unit setup and parameter configuration.
Explains basic controller functions like ON/OFF, locking, and mode switching.
Details how to adjust temperature, CO2, humidity, and air volume settings.
Covers controller display of errors, bypass status, and filter alarm indicators.
Provides a comprehensive guide to configuring various operational parameters.
Instructions for setting the clock, day, and weekly ON/OFF schedules.
Details Modbus protocol settings and parameter addresses for system integration.
Explains the functionality of the DIP switches for defrost and bypass modes.
Describes how to connect an external switch for fan control.
Step-by-step guide for cleaning or replacing the unit's air filters.
Procedures for cleaning the heat exchanger and recommended maintenance intervals.
Provides common issues, potential causes, and solutions for unit malfunctions.
Lists available after-heater models with their specifications.
Instructions for installing and electrically connecting the after-heater to the ERV.
How to set the desired outlet temperature using the control knob.
Explains the meaning of different LED light patterns for status indication.
Guides on diagnosing malfunctions and performing necessary cleaning.
Electrical wiring diagram for the 1.0 kW electric duct heater.
Electrical wiring diagram for the 2.0 kW electric duct heater.
Electrical wiring diagram for the 3.0 kW electric duct heater.
Explains symbols indicating potential levels of caution for safe operation.
Details situations posing risks of death or serious injury, requiring strict adherence.
Outlines precautions for installation, operation, and maintenance to prevent injury or damage.
Provides detailed physical dimensions for the ERV500 model.
Provides detailed physical dimensions for the ERV1000 model.
Provides detailed physical dimensions for the ERV2000 model.
Lists specific measurements and duct sizes for different ERV models.
Covers general advice, ducting, environmental factors, and operational considerations for installation.
Details physical mounting methods, duct connections, and insulation requirements.
Outlines required cable specifications and electrical safety warnings for installation.
Illustrates the electrical connections for ERV500 and ERV1000 models.
Illustrates the electrical connections for the ERV2000 model.
Provides a step-by-step guide for initial unit setup and parameter configuration.
Explains basic controller functions like ON/OFF, locking, and mode switching.
Details how to adjust temperature, CO2, humidity, and air volume settings.
Covers controller display of errors, bypass status, and filter alarm indicators.
Provides a comprehensive guide to configuring various operational parameters.
Instructions for setting the clock, day, and weekly ON/OFF schedules.
Details Modbus protocol settings and parameter addresses for system integration.
Explains the functionality of the DIP switches for defrost and bypass modes.
Describes how to connect an external switch for fan control.
Step-by-step guide for cleaning or replacing the unit's air filters.
Procedures for cleaning the heat exchanger and recommended maintenance intervals.
Provides common issues, potential causes, and solutions for unit malfunctions.
Lists available after-heater models with their specifications.
Instructions for installing and electrically connecting the after-heater to the ERV.
How to set the desired outlet temperature using the control knob.
Explains the meaning of different LED light patterns for status indication.
Guides on diagnosing malfunctions and performing necessary cleaning.
Electrical wiring diagram for the 1.0 kW electric duct heater.
Electrical wiring diagram for the 2.0 kW electric duct heater.
Electrical wiring diagram for the 3.0 kW electric duct heater.
General| Type | Energy Recovery Ventilator |
|---|---|
| Filter Type | MERV 8 |
| Frequency | 60 Hz |
| Protection Class | IP20 |
| Dimensions | Varies by model |
To Next Page
