EasyManua.ls Logo

Mark FBA - Cooling Functionality and Components; FBA-K Ultra for Heating and Cooling; Condensate Pump Specifications

Mark FBA
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
8 Cooling
8.1 Air heaters for heating and cooling
Units FBA-K Ultra 630, 730 and 830 are suitable for
cooling also. In this case a unit is equipped with an
additional drip tray [1] and a condensate pump [2].
The units are fully connected with hoses and electrical
wiring.
In addition to the electrical connection a condensate drain
can be installed.
The condensate pump has been designed according to the
capacity tables. External heads of the condensate
connection must be complied in accordance with
the technical data.
The condensate pump lies in the drip tray. In the inlet of
the pump a round lter has been inserted. See gure [2].
The condensate pump is designed for continuous use.
For maintenance and cleaning the condensate pump is
easily accessible through the removable louvre grill [3].
Condensate drain
A condensate drain can be applied locally. The conden-
sate drain can be adjusted with a pressure hose (inner
diameter of 6mm). Think of the kink-free bends and
frost-free operation!
8.2 Specicationscondensatepump
Max. power 45 l/h
Max. temperature of liquid 0,5m
Allowed max. temp. on-site 35 ºC
back-up system
Power 230V
Prestation 13W
100mA
Soundlevel L PA 30 dB
EN

Related product manuals