5
2 Safety
Before assembly, commissioning and/or maintenance we refer to this technical manual. Failure to
comply with the technical manual can cause personal harm and malfunction of the device.
Note:
The Tanner FBA device may only be maintained when:
• The isolation switch is connected;
• There is no power connection;
• Electrically operated and/or rotating parts are protected against restarting (isolation switch);
• The rotating part has stopped;
• The components have been cooled down to room temperature.
Note:
Only qualied personnel should perform maintenance on the electrical components. Consider the
local regulations! Changes or additions to the device invalidate the declaration of conformity from
the manufacturer.
Meaning of the symbols used in this manual:
If there is no compliance with the instructions in this manual, it creates:
• Danger to the lives of persons;
• Damage to the unit.
Risk of the electrical components.
Warning of hazardous or harmful actions.
Guidelines or references that are important for the functioning of the device.
Information and advice.
EN
To Next Page
Loading...
