9
WASH-1 USER GUIDE
WASH OVERVIEW
The Wash Overview feature in Eiger allows you to track your parts through the Wash-1 debinding process. The
Wash Overview also allows you to record the initial and end masses of parts to help you determine when a part
WASH TIMES AND BATCHES
The Eiger software only recommends minimum Wash-1 chemical debinding times. The Opteon SF79 solvent
will not damage the part, and It is important to fully debind each
part in the Wash-1 to avoid potentially damaging wax buildup in the Sinter-1 unit.
However, a part that remains in the immersion chamber for an extended period may be jostled and damaged by
contact with other parts or by the Wash-1 operator. We recommend carefully tracking wash times and batching
wash cycles to avoid physical damage.
moving them to the Sinter-1 only
To Next Page
Loading...
