WARNING
24
1) Please make sure there is no debris in the paper bin before use, otherwise,
the print head may be damaged during printing. If there is any dirt, please clean
the paper bin and print the head with alcohol.
2) Please turn off the power immediately when the label maker is go wrong.
3) There is a complex circuit inside the label maker and please do not
disassemble the label maker yourself.
4) Please do not squeeze, mechanical vibration, shaking the label maker.
5) Do not use the label maker near flammable materials such as gas stations and
fuel depots.
6) Please charge the battery in a cool, ventilated room. Do not expose the label
maker and USB cable to high temperatures, high humidity or put them in water to
avoid short circuits, causing the battery to heat up, smoke, deformation, damage,
or even an explosion. If the label maker and USB cable are connected to melt to
water or other liquids, disconnect the power immediately. When you find that the
label maker or power adapter smoke or smell, please unplug the power adapter
immediately and pay attention to avoid being burned.
7) Do not disassemble or modify the label maker, and strictly forbid charging with
a damaged power cord, otherwise it will lead to electric shock, fire, and label
maker damage.
NOTES
25
1) Please keep this product and accessories in a safe place out of the reach of
children to prevent danger.
2) Please do not disassemble the printer by yourself. When the the machine is
printing, please do not open the paper bin cover.
After printing is finished, the print head is still in a high temperature state, please
do not touch it to avoid burns.
3) When charging the printer and power adapter should be placed in room
temperature ventilation.
4) Please use a clean soft cloth to gently sassafras printer, prohibit the use of
dissolved substances, with corrosive chemicals and cleaning agents, such as
benzene, thinner.
5) Make the power adapter, please make sure that the printer powered off. Too
high an ambient temperature or too low an ambient temperature will result in
lower print quality.
6) Contact after-sales customer service when the battery cannot meet the
performance requirements.
7) Please use our original printing paper, otherwise it may lead to poor print
quality or even damage the printer.
8) The time of printing last on thermal paper is related to the quality of the
thermal printing paper.
9) If you want to print receipts for long-term preservation, please Use long-lasting
thermal printing paper.
10)If you use a power adapter to supply power, you should purchase a power
adapter that has obtained CCC certification to meet the standard requirements.
To Next Page
Loading...