INTRODUCTION
2 3
Product Model: P50
Printing width: 20mm~50mm
Print accuracy: 203DPI
Bluetooth: 4.0
Battery capacity: 1200mAh
Charging time: less than 3 hours
Battery life: continuous printing length greater than 150 meters
Battery lifespan:charge and discharge times: more than 500 times
Printing life: more than 50km;
This label maker is only suitable for printing thermal label paper. For
better printing quality, it is recommended to use label paper from our
shop.
If the label maker is not used for a long time, in order to ensure the
battery life, it needs to be charged regularly.
The print head needs to be cleaned with alcohol cotton for a long time;
Note: Consumers shall use
the power adapter thathas
obtained China Compulsory
Certification andmeet the
standard requirements.
USB
On/off button
Basic parameters
To Next Page
Loading...