Marklin Digital 60657 - Locomotive Management; Registering mfx Locomotives

6
Control knob
Direction reversing
Shift+controlknobforfastlocomotiveselection
Lokomotive selction
Locomotive icon and locomotive name
Selection
Shift
Stop
Selection
Entering Lokomotives
Memory space
Locomotive list;
occupied
Memory space
Locomotive list;
open
Solonoid
accessories
mfx locomotive
is recognized;
data is read in.
mfx locomotive is ready to be used and can
be run.
If desired or if necessary, the locomotive
and function icons in the menu „Confi guring
Locomotives“ can be edited as described
starting on page 14.
Registering an mfx Locomotive
“blinks“ during
registration.
Memory space in the loco-
motive list is occupied.
An open memory place in
the locomotive list is auto-
matically recognized.
M
Place your locomotive with the mfx-decoder on the
track. The locomotive registers itself as shown in the
following illustrations.
40internalmemoryplacesareavailable,amongthem11(10+1).The11thplaceisvariable.
This means that when a new locomotive card or mfx locomotive is read in, they overwrite
the 11th place and push the previous locomotive into the internal memory place.
Entering a Locomotive