21
Select
Reset
Select
! Important. When you do a Reset, all of the data and settings are deleted.
Factory Default Settings MS 2
Select:
Factory default
setting
A maximum of 2 Mobile Stations can be connected to the track box. The “Master” Mobile
Station is recognized automatically. The other Mobile Station is then set as the “Slave”.
Entering, recognizing, and programming a locomotive are only done with the “Master”
Mobile Station. You determine which locomotives are taken over into the “Slave”
Mobile Station.
Work with two Mobile Station
B
0
!Only one Track Box
may be connected to a
layout.
To Next Page
Loading...
