10
Address selected
Confirm selection
SHIFT
+
Select letter
The letters or digits can be se-
lected at this spot.
Cursor
back
Forward
Select: Scroll
The following steps are the
same for all types of decoders.
The selection of the decoder
controls editing of the locomotive later on. For example,
with programmable decoders changing the address must
also be sent to the locomotive to be stored in memory, but
not for locomotives with coding switches.
Select:
Enter manually
Select: Ex. MM2
programmable
Address range:
MM2 with coding switches 1- 80
MM2 programmable 1 - 255
DCC 1 - 10239
SHIFT
+
Select Address
or
To Next Page
Loading...
