IP Eye Anywhere
- 25 -
DDNS Setting
With the Dynamic DNS feature, you can assign a fixed host and
domain name to a dynamic Internet IP address. Select the Enable
option to enable this feature. Then, select the Provider from the
pull-down list and enter the required information in the Host Name,
User Name, and Password boxes. Please note that you have to
sign up for DDNS service with the service provider first.
UPnP
The camera supports UPnP (Universal Plug and Play), which is a
set of computer network protocols that enable the device-to-device
interoperability. In addition, it supports port auto mapping function
so that you can access the camera if it is behind an NAT router or
firewall. Select the Enable option to enable this feature.
Ports Number
- HTTP Port: The default HTTP port is 80.
- RTSP* Port: Configure the transmission of streaming data within
the network. The default RTSP (Real Time Streaming Protocol)
port is 554.
*Supported by IEA 20 and 21 only.
NOTE If the camera is behind an NAT router of firewall, the suggested
to be used is from 1024 to 65535.
To Next Page
Loading...