Marmitek IP EYE ANYWHERE 21 - Rear View

External Antenna*
Screw Hole is used
to connect the camera
stand.
Ethernet Cable Connector
is used to connect the
network cable, which supports
the NWay protocol so that the
camera can detect the
network speed automatically.
DC Power Connector
is used to connect the
A
C power adapter, in
order to supply power
to the camera.
Reset Button will restart
the camera when it is
pressed quickly; when it is
long pressed for five
seconds, the camera will
resume the factory default
settings.
Rear View
*IEA11 and IEA21 only.
IP Eye Anywhere
- 5 -