M4 - Mx computer System | V2 | Introduction and Presentation
Introduction and Presentation
Read this section to get a basic knowledge of your M4 system.
Tip: Click Marport logo at the bottom of pages to come back to the table of contents.
Introduction
The M4 is our heavyweight acoustic receiver, combining the latest digital signal processing with
the smartest software. This means that true multifunction channel operation is available and there
is no compromise between transmission range and signal detection. We have designed the M4’s
multifunctional capacity to accommodate a series of full-function channels allowing simultaneous
use of standard sensors, net sounders – including narrow band – and high resolution net sounders.
All of these are available over an extended frequency range and with selectable configurations for
ultramodern net monitoring systems.
The M4 incorporates a host of features that are ready to be implemented, including sensor cross-
referencing for positioning and distance, and sensor remote control.
The M4 receiver is built to be configured and upgraded using standard software tools and operated
with Mac OS, Firefox® web browser and Java™ Runtime Environment (JRE).
Note: This system is not sold anymore, but it can be upgraded with an Mx computer.
Note:
These labels tag topics or actions that are specific to Scala and/or Scala2.
Depending on the version you have, you may follow either one of these labels.
| 6
To Next Page
Loading...
