Page 17
Additional output settings - Setting are used to link onboard actions with the outputs if needed:
• Input 1 activate output: Alarm input event on the input will activate output defined under
this section.
• Input 2 activate output: Alarm input event on the input will activate output defined under
this section.
• Input 3 activate output: Alarm input event on the input will activate output defined under
this section.
• Input 4 activate output: Alarm input event on the input will activate output defined under
this section.
• GSM network error: Trouble with GSM module or lack of GSM network coverage will
activate output defined under this section.
• System tamper: Tamper activation will activate output defined under this section.
• System ARM/DISARM: Activation/deactivation of ARM/DISARM input will activate
/deactivate output defined under this section.
• Unauthorized call or SMS received: If unauthorized call or SMS is received on the unit
this event will activate output defined under this section.
• Listen in indication: When listen in function is active output defined under this section gets
activated.
• CID error indication: When CID function is errored, output defined under this section gets
activated.
To Next Page
Loading...
