Need help?Do you have a question about the Marshall Amplification 5010 and is the answer not in the manual?
General| Model | 5010 |
|---|---|
| Inputs | 1 x 1/4" |
| Effects Loop | No |
| Footswitchable | No |
| Type | Solid State |
| Speaker | 1 x 12" Celestion G12M-70 |
| Outputs | 1 x 1/4" (Headphones) |
Details on the robust construction and quality materials used in Marshall amplifiers for durability and performance.
Explanation of the power switch, standby function, and the instrument input jack configurations.
Description of the controls for channel volume, treble, middle, bass, and presence.
Details on the power switch, standby function, and the high/low input jack connections.
Explanation of the master volume, treble, middle, bass, and presence controls.
Information on H.T. fuse, mains fuse, mains input, and mains voltage selection.
Details on output selectors, loudspeaker output jacks, and D.I. output.
Guidance on achieving desired sounds with Super Lead amplifiers, including tone shaping.
Diagram and instructions for linking multiple 1959 or 1987 amplifiers together.
Details on input sensitivity, power output, and tone range characteristics for the 1959 model.
Information on power supply requirements and the specific valves used in the 1959 model.
Details on input sensitivity, power output, and tone range characteristics for the 1987 model.
Information on power supply requirements and the specific valves used in the 1987 model.
Details on input sensitivity, power output, and tone range for models 2203 and 4103.
Information on power supply needs and valves for models 2203 and 4103.
Details on input sensitivity, power output, and tone range for models 2204, 4104, and 4010.
Information on power supply needs and valves for models 2204, 4104, and 4010.
Description of high/low inputs, pre-amp volume, and master volume controls.
Details on treble, middle, bass, presence controls, and line-out/headphone sockets.
Specifications for input sensitivity, tone range, output power, and power supply for the 5005 model.
Specifications for input sensitivity, tone range, output power, and power supply for the 5002 model.
Specifications for sensitivity, tone swing, output power, and power requirements for the 5010 model.
Description of input jack, pre-amp, master volume, treble, middle, and bass controls.
Details on reverb control, line-out socket, and headphone socket functions.
Explanation of input, pre-amp, master volume, treble, middle, and bass controls.
Details on presence, reverb controls, headphone, and line-out sockets.
Description of input, gain, treble, middle, and bass controls for the 4001 model.
Details on output level control and the standby switch function.
Information on mains input connection and the mains fuse for the 4001 model.
Details on balanced line-out, headphone output, and unbalanced line-out sockets.
Specifications covering input sensitivity, power output, tone range, and headphone output.
Details on unbalanced line-out, signal-to-noise ratio, and valve complement.
Description of high/low inputs, pre-amp, master volume, and treble controls.
Details on middle, bass controls, line-out, and headphone sockets.
Information on mains input and loudspeaker output jack connections.
To Next Page