Marshall Amplification CV380-CS User Manual

CV380-CS Manual
www.marshall-usa.com 6
4. AE CONTROL
• AUTO: Adjusts the exposure level automatically. Detailed fine tuning options are available
under this menu.
• SHUT FIX: Provides more detailed shutter speed options. All other controls are tuned for the
selected shutter speed.
• IRIS FIX: Provides more detailed iris control options. All other controls are tuned for the
selected iris setting.
• AGC FIX: Provides more detailed gain option. All other controls are tuned for the selected gain
value.
1. SHUTTER: Speed can be set at auto or manual. (1/30~1/10,000)
2. AGC MAX: Used to set maximum gain value to control the video noise caused by Auto
Gain Control. (Off, Low, Middle, High, DMIN, DMID, DMAX)
3. SENS UP: Controls the digital slow shutter to allow extra light into the camera and adjust
the picture quality. (Off, x2~x10)
4. AE BRIGHT: Select this to adjust auto exposure brightness levels. (0~10)
5. IRIS SPEED: Electronic Iris speed can be controlled, for DC Iris lens only. (0~5)
6. LENS MODE: Lens setting will be optimized for selected enviornment, for DC Iris lens only.
7. FLK CONTROL: Provides a proper image sensor frequency to match the power frequency
in order to minimize video flicker.
WB CONTROL
AE CONTROL
DAY/NIGHT
AUDIO
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
MODE
SHUT FIX
IRIS FIX
AGC FIX
RETURN
MANUAL
>
AUTO
>
>
OFF
>
ON>
AUTO
>
MENU AE CONTROL
Select AE CONTROL using the UP or DOWN button. You can select one sub-mode using the UP or
DOWN buttons.

Marshall Amplification CV380-CS Specifications

General

Brand	Marshall Amplification
Model	CV380-CS
Category	Digital Camera
Language	English