Marshall Amplification CV380-CS - Audio Input and Settings; Audio MIC;LINE Selection; Audio Level Adjustment; Audio MIC Attenuator

CV380-CS Manual
www.marshall-usa.com 8
• MIC / LINE: When using audio microphone use MIC mode, when using other audio sources
use LINE setting
• AUDIO LEVEL: Select this to adjust audio levels manually.
• MIC ATTENUATOR : Audio attenuation can be controlled from this menu to minimize the
audio noise level
1. SAMPLE BITS: Select the bit depth of audio
WB CONTROL
AE CONTROL
DAY/NIGHT
AUDIO
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
MIC LINE
AUDIO LEVEL
MIC ATTENUATOR
SAMPLE BITS
RETURN
MANUAL
>
AUTO
>
>
OFF
>
ON>
24
24 BITS
>
MENU AUDIO
6. AUDIO
Select AUDIO using the UP or DOWN button and enter ON using SEL button. You can select one
sub-mode using the UP or DOWN buttons.