Marshall Amplification CV380-CS - Day and Night Mode Settings; DAY;NIGHT AUTO Mode; DAY;NIGHT COLOR Mode; DAY;NIGHT NIGHT Mode

7
MODE: Set camera to either color mode or B&W mode. (Day, Night)
DAY: When set to DAY mode, camera stays in color and IR cut filter is engaged.
NIGHT: When set to NIGHT mode, camera stays in B&W and IR cut filter is removed.
• NIGHT COLOR: When on, camera stays on color mode. Night (B&W) can be selected from
this mode. (On, Off)
• COLOR BURST: Signal ON or OFF can be set for CVBS signal. (On, Off)
WB CONTROL
AE CONTROL
DAY/NIGHT
AUDIO
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
MODE
NIGHT COLOR
COLOR BURST
RETURN
MANUAL
>
AUTO
>
>
OFF
>
ON>
DAY (COLOR)
>
MENU DAY/NIGHT
5. DAY / NIGHT
Select DAY / NIGHT using the UP or DOWN button. You can select one sub-mode from AUTO,
COLOR, and NIGHT using the UP or DOWN buttons.