CV420-30X-IP Manual
www.marshall-usa.com 2
Safety Instructions
1. Operation
1.1 Use camera in the recommended operating environments.
1.2 Do not place the camera in tilted position.
1.3 Do not place the product on an unstable cart, stand or table.
1.4 Do not use this product near water, extreme humidity or high heat.
1.5 Use recommended ¼”-20 mounts and attachments.
1.6 Use the power supply that is provided in box.
1.7 Always take the following precautions when handling the power plug. Failure to do so
may result in sparks, shock or fire:
• Ensure the plug is free of dust before inserting it into a socket.
• Ensure that the plug is inserted into the socket completely and securely.
1.8 Do not overload wall sockets, use long extension cords, or plug camera into multi-
output power strips.
1.9 Do not block vents on the camera body as they provide ventilation and prevent the
product from overheating.
1.10 Do not open or remove camera body, camera warranty is void if opened.
1.11 Unplug the product from the wall outlet and consult a licensed service technician when
the following conditions arise:
• f the power cords are damaged or frayed.
• If liquid is spilled into the product or the product has been exposed to rain or water.
2. Installation
2.1 For security consideration, please make sure any mounts that are used are standard UL
or CE safety certified and installed by technician personnel.
3. Storage
3.1 Do not mount camera where power cord can be stepped on, as this may result in
fraying or damage to the lead or the plug.
3.2 Never allow debris or objects of any kind to penetrate camera body. Never allow liquid
of any kind to spill onto or into the camera body.
3.3 Unplug this product during thunderstorms, during electrical surges, or if it is not going
to be used for an extended period of time.
3.4 Do not place camera or accessories on top of vibrating equipment or heated objects.
4. Cleaning
4.1 Unplug all the cables before cleaning. Use a damp cloth for cleaning. Do not use liquid
or aerosol cleaners or allow any liquids to enter camera body.
To Next Page
Loading...
Need help?
General
