Marshall Amplification DSL1HR - Middle Control; Bass Control; Reverb Control; Power Switch

ENGLISH
5
8. MIDDLE
Controls the middle frequencies of your
sound. Turning clockwise increases the level of
mid frequencies in your sound. Turning an-
clockwise reduces the middle frequencies,
‘scooping’ the sound – this is accentuated when
used in conjuncon with Tone Shi.
9. BASS
Controls the amount of lower frequency in your
sound. Turning clockwise will increase boom-
end making the sound fuller.
Note: The EQ controls are linked. Altering
the seng of one control can change the way
that the other controls behave, so it is worth
experimenng to nd your sound.
10. REVERB
Controls the overall reverb level.
11. POWER
This turns the amp on and o.