Marshall Amplification DSL20HR - Warning! Safety Instructions

FRONT PANEL FUNCTIONS
6. VOLUME
Controls the volume level of the ULTRA
GAIN channel.
EQUALISATION SECTION
7. TONE SHIFT
Recongures the preamp EQ network’s
mid frequencies adding a new dimension
to tonal shaping.
8. TREBLE
Controls higher frequencies of your
sound. Turning clockwise will increase
the highs making your sound brighter
and more crisp.
9. MIDDLE
Controls the middle register of your
sound. Turning clockwise adds girth.
Turning anticlockwise reduces the
middle frequencies ‘scooping’ the
sound – this is accentuated when used in
conjunction with Tone Shift (Front Panel
Function #7).
10. BASS
Controls the amount of lower frequency,
or bottom-end, in your sound. Turning
clockwise will increase the bottom-end
making the sound fuller.
Tonal Note: The preamp EQ network is
dynamic and highly interactive. Please note
that because of this, altering the setting of
one control can change the way that the
other controls behave – experiment to nd
your sound.
1234567
8
1. INPUT
Input jack socket for your guitar cable.
Use a good quality screened/shielded
guitar cable to help prevent noise
interference.
CLASSIC GAIN CHANNEL
2. GAIN
Controls the gain level for the CLASSIC
GAIN channel. As the amount of gain
increases, so will the distortion level in
your sound.
3. VOLUME
Controls the volume level for the
CLASSIC GAIN channel.
4. CHANNEL SELECT
Press to switch between CLASSIC GAIN
and ULTRA GAIN channels.
The CLASSIC GAIN channel status LED
will light green to indicate that CLASSIC
GAIN channel is selected.
The ULTRA GAIN channel status LED
will light red to indicate the ULTRA GAIN
channel is selected.
Note: Channels can be selected using the
supplied 2-way footswitch.
ULTRA GAIN CHANNEL
5. GAIN
Controls the gain level for the ULTRA
GAIN channel. As the amount of gain
increases, so will the distortion level in
your sound.
DSL20C FRONT PANEL
DSL20H FRONT PANEL
9101112131415
9 10 11 12 13 14 151 2 3 4 5 6 7 8
ENGLISH ENGLISH