Marshall Amplification KILBURN - Plugging In the Kilburn Loudspeaker

PLUGGING IN THE KILBURN LOUDSPEAKER
001. INSERT THE POWER CORD INTO THE POWER SOCKET ON THE BACK
OF THE LOUDSPEAKER.
002. CONNECT THE CORRECT POWER CORD TO THE WALL SOCKET.
CAUTION: ALWAYS UNPLUG
THE POWER CORD FROM
THE WALL SOCKET BEFORE
DISCONNECTING IT FROM
THE LOUDSPEAKER.
NOTE: THE POWER
CORD IS INCLUDED.
010.
002.
001.
002.001.