Marshall Amplification MINOR III User Manual

PAIRING A NEW DEVICE
Minor III remembers up to 6 previously paired devices and will try to
reconnect with the last connected device.
1. Place the earbuds in the case and keep the lid open.
2. Press and hold the button on the bottom of the case until the LED
turns to a slow blue pulse.
3. Select MINOR III from your sound device’s Bluetooth list.
Note: Minor III can be connected with one sound device at a time. Make
sure to disconnect from the current device before reconnecting with a
different device.
RESETTING THE EARBUDS
If your earbuds become erratic or unresponsive, follow the instructions below.
1. Place the earbuds in the case and close the lid to restart the earbuds.
If the problem persists, perform a factory reset.
Note: This will delete all user settings and the earbuds will need to be
paired again.
1. Place the earbuds in the case and keep the lid open.
2. Press and hold the Bluetooth pairing button for 10 seconds, until
the LED turns purple, to reset the earbuds to factory settings.
3. Remove MINOR III from your sound device’s Bluetooth list before
pairing again.
If the problem persists, perform a hardware reset.
Note: This will delete all user settings and the earbuds will need to be
paired again.
1. Place the earbuds in the case and keep the lid open.
2. Press and hold the Bluetooth pairing button for 15 seconds to reset
the earbuds.
3. Remove MINOR III from your sound device’s Bluetooth list before
pairing again.

Marshall Amplification MINOR III Specifications

General

Brand	Marshall Amplification
Model	MINOR III
Category	Headphone
Language	English