SELECTING AUDIO SOURCE
THERE ARE MANY WAYS TO CONNECT TO YOUR STANMORE II, EITHER WIRELESSLY OR BY CABLE.
WIRELESS Bluetooth CONNECTION
AUX – 3.5 mm STEREO JACK
RCA – DOUBLE RCA (LEFT AND RIGHT) JACKS
1. PUSH THE SOURCE BUTTON TO TOGGLE BETWEEN Bluetooth, AUX, AND RCA AUDIO SOURCE.
2. A LIT INDICATOR SHOWS WHICH SOURCE IS SELECTED.
THE SOURCE CAN ALSO BE SELECTED FROM THE MARSHALL BLUETOOTH ® APP.
CONNECTING VIA Bluetooth (PAIRING)
1. SELECT Bluetooth AS THE INPUT. PUSHING THE SOURCE BUTTON TOGGLES THE INPUT SOURCES.
2. PUSH AND HOLD THE SOURCE BUTTON FOR 2 SECONDS.
THE Bluetooth INDICATOR STARTS TO BLINK.
3. ENABLE Bluetooth ON YOUR DEVICE (SMARTPHONE, TABLET, COMPUTER).
4. SELECT STANMORE II FROM THE Bluetooth LIST AND ACCEPT PAIRING.
THE Bluetooth INDICATOR ON THE SPEAKER STOPS BLINKING AND REMAINS LIT WHEN THE UNITS ARE CONNECTED.
STANMORE II CAN BE CONNECTED TO TWO Bluetooth DEVICES AT THE SAME TIME.
PLAYING A CONNECTED Bluetooth DEVICE WILL MAKE IT THE SELECTED AUDIO SOURCE, PAUSING ANY PREVIOUSLY PLAYED AUDIO ON
To Next Page
Loading...
Need help?
General
