What to do if Marshall Amplification Speakers are not responding?
If your Marshall Amplification speaker is not responding, unplug the power plug from the wall socket, wait 15 seconds, and then plug it back in.
What to do if there is no audio from my Marshall Amplification STANMORE III?
If you're not getting any sound from your Marshall Amplification Speakers, there are a few things to check. First, make sure you've selected the correct audio source using the source button. Also, verify that your audio device is properly connected to the speaker. Finally, check the volume levels on both your audio source and the speaker itself, and increase them slightly if they are too low.
Why is the audio distorted on my Marshall Amplification Speakers?
Audio distortion on your Marshall Amplification Speakers can occur if the volume is set too high on the audio source. Try turning down the playback volume on your device. Also, check the speaker's settings; reducing the volume, bass, or treble levels may resolve the issue.
General| Power Output | 80 W |
|---|---|
| Connectivity | Bluetooth 5.0, RCA, 3.5 mm input |
| Amplifier Class | Class D |
| Adjustable Bass and Treble Controls | Yes |
| Stereo/Mono | Stereo |
| Type | Wireless speaker |
| Frequency Response | 45Hz - 20kHz |
| Mains Input Voltage | 100–240 V |
| Wireless Range | Up to 10 meters (33 feet) |
To Next Page
