What to do if there is no audio from Marshall Amplification STOCKWELL II Speakers?
If you're not hearing any audio from your Marshall Amplification Speakers, there might be a simple fix. Check that the correct audio source is selected and properly connected to the speaker. Also, make sure the volume isn't set too low on either your audio source or the speaker itself. Try slightly increasing the volume on both to see if that resolves the issue.
Why does the Bluetooth connection keep dropping on my Marshall Amplification Speakers?
If your Marshall Amplification Speakers Bluetooth connection keeps dropping, the issue might be related to distance or interference. Try moving your Bluetooth device closer to the speaker, ensuring they're within 10 meters of each other and there are no obstructions like walls or doors in the way. Also, be aware that strong electric fields from microwave ovens, wireless network adapters, fluorescent lights, and gas cookers can cause interference, as they use the same frequency range. Try moving the speaker away from these items.
What to do if the audio is distorted on Marshall Amplification STOCKWELL II Speakers?
If the audio from your Marshall Amplification Speakers is distorted, there are several things you can check. First, decrease the playback volume on your audio source. If that doesn't help, the audio stream or file itself might be of poor quality, so try using a different file or music player. Also, check the volume level on the speaker and decrease it if it's too high. Lastly, adjust the bass and treble levels on the speaker, decreasing them if necessary.
What to do if Marshall Amplification Speakers are not responding?
If your Marshall Amplification Speakers are not responding, it might be due to a software problem. First, turn the speaker off by rotating the volume knob counter-clockwise until you hear a click. Wait for 15 seconds, and then turn the speaker back on. If this doesn't work, you can reset the speaker to its default settings by pushing and holding the Bluetooth button for 6 seconds. Keep in mind that this will erase all Bluetooth pairings.
Why are my Marshall Amplification Speakers making a crackling sound?
If you hear a crackling sound from your Marshall Amplification Speakers, it's likely that the amplifier is clipping because it has run out of output power. Try decreasing the volume on your audio source. Additionally, reduce the volume or bass levels directly on the speaker.
Why are my Marshall Amplification STOCKWELL II Speakers performing erratically?
If your Marshall Amplification Speakers are showing erratic performance, it might be due to interference from another electronic device. Try moving the speaker to a different location. You can also try turning off or moving any nearby electronic devices that might be causing interference.
General| Brand | Marshall |
|---|---|
| Model | STOCKWELL II |
| Category | Speakers |
| Type | Portable Bluetooth Speaker |
| Bluetooth Version | 5.0 |
| Battery Life | 20+ hours |
| Water Resistance | IPX4 |
| Frequency Range | 60 Hz - 20 kHz |
| Adjustable Bass and Treble Controls | Yes |
| Stereo/Mono | Stereo |
| Maximum Sound Pressure Level | 80 dB |
| Amplifiers | Class D |
| Battery Type | Lithium-ion |
| Wired Connectivity | 3.5mm Input |
| Wireless Range | 10 m |
| Inputs | 3.5 mm |
| Colors | Black |
| Weight | 1.38 kg |
| Driver Size | 2 x 10W Class D amplifiers for the woofer, 2 x 5W Class D amplifiers for the tweeters |
| Charging Time | 5 hours to full charge |
To Next Page
